OEM Powder Coating Sheet Metal

OEM powder Coating Sheet Metal refers to the process of applying a durable and protective coating to sheet Metal Components that are used in original equipment manufacturing (OEM) applications. Powder Coating is a dry finishing process where a fine powder is applied electrostatically to the metal surface and then cured under heat to form a hard, protective layer.Compared with other conventional processing methods,Silicon Steel Plate Laser Cutting has greater adaptability. First of all, compared with other thermal cutting methods, as a thermal cutting process, other methods can not act on a very small area like laser beams, resulting in wide cuts, large Heat-affected zone and obvious deformation of the workpiece. Laser can cut non-metals, Corrugated Metal while other thermal cutting methods cannot.

Laser cutting technology has the following advantages:

Firstly, Metal Cover high accuracy: positioning accuracy 0.05mm, repeated positioning accuracy 0.02mm.

Secondly, narrow slits: The laser beam is focused into very small light points, achieving a high power density at the focal point. The material is heated to the point of gasification and evaporates to form pores. As the beam of light moves linearly with the material, the holes continuously form narrow slits. The width of the incision is generally 0.10-0.20ram.

Thirdly, the cutting surface is smooth: there are no burrs on the cutting surface, and the surface roughness of the incision is generally controlled at Ral2.5; Within A.

Fourthly, fast speed: The cutting speed can reach lOm/min, and the maximum positioning speed can reach 70m/m/n, which is much faster than the speed of wire cutting.