Precision Bending Stamping Sheet Metal

1 piece high quality precision bending stamping Sheet Metal Fabrication Sheet Metal cabinets sheet metal working send inquiry Deburring
Regardless of the processing method used in the previous process, Laser Cutting burrs (slag), punch cutting burrs, flash edges, etc. will be generated to a certain extent. The process of removing these is the deburring process. It can be manually completed using a manual angle grinder or file, Mild Steel Sheet or processed using a deburring machine with rotating sandpaper.
The general bending process of mechanical sheet metal involves installing molds onto equipment called bending machines and applying pressure to the cut sheet metal to bend it linearly at a certain angle. In a bending machine, the upper mold (convex mold) is installed in the upper part of the equipment, and the lower mold (concave mold) is installed in the lower part. The upper part of the equipment moves up and down to bend the Metal Plate, but the angle obtained by bending varies depending on the material batch and rolling direction, so fine adjustments are required every time, making processing difficult. However, it can be said to be one of the most important processes in Sheet Metal Processing, as the difficulty and aesthetics of welding processing in subsequent processes will vary greatly due to the accuracy of the bending process. In addition, "bending machine" is sometimes also known as "bending machine", Thick Aluminium Sheet "bending machine", etc. They all refer to the same equipment.
in the deburring process of sheet metal processing, it is difficult to perform precise dimensional management such as C0.2 and R0.2 like in cutting. In this regard, the drawing indication of "no burrs" is ambiguous, but it seems to be effective if the indication of "hoping to remove burrs to the extent that they will not cut the hand" is used. When placing an order, Coating Sheet Metal it is best to reach a consensus with the processing plant regarding the allowable range of burrs.

Bending